SPM-2920 Renewable Diesel Hydrotreater

Process Description Renewable Diesel Hydrotreater (RDHT) Simtronics’ Renewable Diesel Hydrotreater (RDHT) simulator enables detailed training of the operating principles of RDHT units becoming commonly found in the petroleum refining industry. …

SPM-3500 NGL Recovery Unit

Process Description The NGL Recovery Unit program represents a typical Gas Subcooled Process (GSP) with a turbo-expander. The feed to the unit is gas gathered from wells that has been …

SPM-3510 Turbo-Expander

Process Description Simtronics’ Turbo Expander program illustrates the principles and operation of a typical turbo expander unit. The turbo expander unit consists of a gas expander (turbine) directly coupled to …

SPM-3010 Advanced GOSP

Process Description Process Overview The Advanced Gas-Oil Separation Process includes three crude oil production wells, High and Low Pressure Production Manifolds, a Test Manifold, a Test Separator, and two parallel …

SPM-3020 Three Phase Separator Black Image

SPM-3020 Three Phase Separator

Process Description Three Phase Separator, D-001 Crude oil from a manifold is brought into one end of the Three Phase Separator, D-001 and enters the upper section of the vessel …

SPM-3530 Gas Compression Plant

Process Description The Gas Compression Plant consists of multiple centrifugal compressors. Each centrifugal compressor will have the following characteristics. Gas passes through a suction valve before entering the suction drum. …

SPM-3030 Gas Dehydration Unit

Process Description The Gas Dehydration Unit removes water vapor from produced gases destined for pipelines using tri-ethylene glycol (TEG) as the desiccating agent in the process. Removal of water vapor …

SPM-3050 Tank Battery

Process Description Production Manifold The Production Manifold collects fluids produced by the three wells. The Production Manifold normally operates at 612 PSIG and 87.9 DEG F with only Well #1 …