SPM-3010 Advanced GOSP

Process Description Process Overview The Advanced Gas-Oil Separation Process includes three crude oil production wells, High and Low Pressure Production Manifolds, a Test Manifold, a Test Separator, and two parallel …

SPM-3020 Three Phase Separator Black Image

SPM-3020 Three Phase Separator

Process Description Three Phase Separator, D-001 Crude oil from a manifold is brought into one end of the Three Phase Separator, D-001 and enters the upper section of the vessel …

SPM-3030 Gas Dehydration Unit

Process Description The Gas Dehydration Unit removes water vapor from produced gases destined for pipelines using tri-ethylene glycol (TEG) as the desiccating agent in the process. Removal of water vapor …

SPM-3050 Tank Battery

Process Description Production Manifold The Production Manifold collects fluids produced by the three wells. The Production Manifold normally operates at 612 PSIG and 87.9 DEG F with only Well #1 …

SPM-3060 Crude Oil Stabilizer Black Image

SPM-3060 Crude Oil Stabilizer

Process Description The Crude Oil Stabilizer unit removes hydrogen sulfide and light gases such as methane, ethane, and propane from raw crude oil received from a Gas Oil Separation Plant …

SPM-3070 Gas Terminal

Process Description High pressure gas from production fields is fed to the Gas Terminal. Associated liquids in the raw gas feed are separated in a Slug Catcher which is specially …

SPM-3080 Oil Terminal

Process Description Crude oil from production fields is fed to the Oil Terminal at high pressure. The oil is preheated and stabilized by flashing of lighter components at successively lower …

SPM-3100 Amine Contactor Black Image

SPM-3100 Amine Treating Unit

Process Description The Amine Treating Unit removes CO2 and H2S from sour gas and hydrocarbon streams in the Amine Contactor. The Amine (MDEA) is regenerated in the Amine Regenerator, and …