Process Description The SPM-1700 Instrumentation III – Multi-Element Control Process Simulation consists of four independent process loops. Each one of these process loops demonstrates one of four basic multi-element control …
Process Description In hydrocarbon processing units, over-pressurizing plant equipment can lead to equipment damage and risk to personnel. This risk is mitigated by releasing gas via pressure control and/or pressure …
Process Description Water enters a mix tank where it can be neutralized by either an HCl (acid) solution or an NaOH (base or caustic) solution depending on its pH. The …
Process Description Simtronics’ Advanced Distillation with Major Emergency Management (MEM) is a full-scope process simulator of a compete distillation unit with tank farm, flare system and utility systems with added …
Process Description Boiler feed water enters the steam drum. Saturated steam is generated in the risers of the boiler. The saturated steam leaves the steam drum and goes to the …
Process Description The Simtronics SPM-2400 Fluidized Catalytic Cracking Unit (FCCU) Process Simulation includes a simulation of the Feed Preheat Exchanger Train, Slurry Settler, FCCU Converter (Reactor), Riser, Stripper, Regenerator, Air …
Process Description The Atmospheric Distillation Unit (ADU) separates crude oil from tankage into lighter end products such as gas, gasoline, naphtha, kerosene, and gas oil to be used as motor …
Process Description The VDU (Vacuum Distillation Unit) separates residue from the ADU (Atmospheric Distillation Unit) into light vacuum gas oil (LVGO), heavy vacuum gas oil (HVGO), slop wax, and vacuum …
Process Description The Atmospheric Distillation Unit (ADU) separates crude oil from tankage into lighter end products such as gas, gasoline, naphtha, kerosene, and gas oil to be used as motor …
Process Description Overview The main objective of the Delayed Coking Unit is to convert low value residual feedstocks to lighter products of higher value and to produce a coke product, …
